Gather a warmed bedpan, gloves, a waterproof underpad, and tissue, then lower the bed flat, help the patient lift at the hips or roll to one side, and slide the curved rim toward the sacrum before raising the head of the bed 30 to 45 degrees, offering privacy and removing the pan smoothly while the patient rolls back onto their side for cleaning.
This guide walks through the full bedpan nursing procedure step by step, from room setup through cleanup, so you can protect dignity, prevent spills, and balance skin and back safety on every use.
Preparing the Room, the Patient, and Yourself
A calm setup prevents most of the spills and awkward moments that follow. Walk in with everything you need so you never have to leave the bedside mid-task, which is exactly when accidents happen.
Gather Supplies Before Approaching the Patient
Set out the bedpan, disposable gloves, a waterproof underpad (also called a Chux), toilet tissue, a wet washcloth, hand sanitizer for the patient, and a draw sheet. Having a spare bedpan nearby matters more than most caregivers expect, because a soiled pan needs a swap-out partner before the next use. Keep a waste bag within arm’s reach so soiled wipes and gloves don’t end up on the floor or the bedside table.
Follow Standard Precautions and Protect the Patient’s Comfort
Hand hygiene comes first, every time, per Standard Precautions from the CDC. Wash with soap and water for at least 20 seconds, dry with a clean towel, and put on disposable gloves before touching linens or the patient. Lower the head of the bed to flat and remove extra pillows so the mattress is a level working surface.
Explain each step in plain language so the person knows what to expect, which reduces tensing and helps the pan seat correctly on the first try.
With the room and the patient already calm and prepped, the next decision is which pan best matches that setup.
Warm a metal bedpan under tepid running water and dry the outside thoroughly before placing it. A cold rim against bare skin can cause a startled flinch that throws off your placement and risks a spill.
Choosing Between a Standard Bedpan and a Fracture Pan
Pick the wrong pan and you’ll fight the patient’s body the entire time. The shape of the rim decides whether you can slide it under a lifted hip or have to roll the person entirely onto their side.
Match the Pan to the Patient’s Mobility and Restrictions
A standard bedpan has a taller, rounded rim that needs a few inches of hip lift. It works for patients who can flex their hips, bear some weight through their feet, and hold a bridge position for a few seconds. A fracture pan (sometimes called a slipper pan) has a low-profile, flat rim that slides under a person who cannot lift at all.
Reach for it after hip replacement surgery, spinal injury, or any condition with strict hip precautions where flexion past 90 degrees is off-limits.
Compare Standard Bedpan and Fracture Pan at a Glance
| Feature | Standard Bedpan | Fracture Pan |
|---|---|---|
| Rim height | Taller, curved rim | Low-profile, flat rim |
| Patient must lift hips | Yes, several inches | No, slides in from the side |
| Best for | Mobile bedridden patients, post-op recovery without hip limits | Hip precautions, spinal injury, weak trunk control, severe pain |
| Capacity | Larger | Smaller, may need emptying during extended use |
| Positioning method | Bridge lift or log-roll | Log-roll only |
Confirm the pan is empty, clean, and dry before bringing it to the bedside. A pan with leftover residue or moisture can soil linens and spread bacteria, undoing your prep work in a single motion.
Positioning the Patient and Sliding the Pan Into Place
Match the method to the answer and the pan ends up under the right spot on the first try.
The Bridge Lift for Patients Who Can Help
Ask the patient to flex both knees with feet flat on the mattress, then to gently lift the hips while you slide your hand under the sacrum to support. The bedpan goes under the buttocks with the wider, curved edge pointed toward the sacrum (the flat triangular bone at the base of the spine) so the rim seats against the buttocks without pressing into the tailbone.
For heavier patients, slide a folded draw sheet at hip level and use it to lift instead of pulling on the pan itself, which can shift the rim out of place or tip the contents.
The Log-Roll for Patients Who Cannot Lift
Roll the patient onto their side facing away from you, expose the buttocks, and press the bedpan firmly against the posterior (back) side. Then roll the patient back toward you so their weight settles onto the pan. Check that the rim sits snugly against the buttocks and that no skin is pinched between the rim and the mattress. A fracture pan is almost always the right call here because its low rim needs almost no hip clearance to slide in.
That decision about rim height now determines exactly how you lift and slide the device beneath the patient.
Never yank on the bedpan to reposition the patient. Lift with your legs, keep the patient close to your body during turns, and treat the pan as a stationary target you’re rolling them onto, not a handle you’re pulling.
Helping the Patient Use the Pan Without Spills or Strain
Once the pan is seated, your job shifts from placement to patience. The next two minutes decide whether the experience feels dignified or humiliating for the person in the bed.
Adjust the Bed and Offer Privacy
Raise the head of the bed 30 to 45 degrees once the pan is in place so the patient sits in a more natural toileting posture, which helps both bladder and bowel emptying. Close the door or pull the privacy curtain, then stay nearby or within earshot. Check in with a calm “yell if you need anything” rather than hovering at the bedside, which raises the stress of an already vulnerable moment.
Assist With Wiping and Remove the Pan Safely
Help with perineal wiping (cleaning the area between the genitals and anus) from front to back when the patient cannot reach, then offer a wet washcloth or hand sanitizer so they feel clean afterward. Lower the head of the bed again before removal so the patient lies flat and the weight shifts off the pan.
Slide the pan out smoothly while the patient rolls onto their side, keeping one hand on the rim and the other supporting the lower back, then cover the pan immediately with a lid or washcloth to contain odor.
Cleaning the Pan, the Patient, and the Bedside
A clean bedside is a safe bedside, and infection control is where this routine either protects or exposes the next caregiver on shift. Consistent cleanup is treated as a non-negotiable part of basic patient hygiene, which aligns with guidance from the Centers for Medicare & Medicaid Services and the American Nurses Association.
Empty, Rinse, and Disinfect the Pan
Empty the contents into the toilet or a designated sluice (a sink or basin reserved for waste disposal), and measure output if the care plan calls for fluid balance tracking. Rinse the bedpan with cold water first, because hot water can cook protein-based waste onto the surface and make it harder to remove.
Then wash with hot soapy water or run it through a commercial bedpan washer per facility policy, since bedpan washers reach temperatures that manual scrubbing cannot match.
Refresh the Patient and Reset the Bedside
Offer the patient a wet washcloth, hand sanitizer, or a basin wash so they feel clean, then change any soiled linens and dispose of waste in a sealed bag according to infection-control protocol. Remove your gloves, wash your hands again, and restock the bedside so the next use runs just as smoothly as this one. A restocked bedside cuts the time-to-bedpan in half during the next call, which matters when the patient is in urgent need.
Keeping Dignity, Comfort, and Safety at the Center
Technical skill matters, but the way you deliver it decides whether the person in the bed remembers the help or the humiliation. Calm language and skin checks belong inside the procedure, not as extras, which aligns with patient-care guidance from Cleveland Clinic and Mayo Clinic.
Protect Skin and Watch for Pressure Injuries
Check the sacrum, tailbone, and heels for redness or shear marks (stripes or dark patches caused by skin being dragged across a surface) after every pan use, and reposition the patient to relieve pressure on bony spots.
Pressure ulcer prevention depends on these small moments of inspection, since a Stage 1 sore (persistent pink or red skin that doesn’t blanch when pressed) is reversible but a Stage 3 sore (a deep wound reaching into the tissue below) often means weeks of wound care. A waterproof underpad under the sheet can also cut down on moisture against the skin during longer uses.
Speak Calmly and Document What You Observed
Explain each touch before it happens and avoid facial expressions or comments that signal disgust or hurry, because patients read your face more than your words. Document the time, output amount, and any observations about skin, pain, or tolerance so the next caregiver or nurse has a complete record. A clear note like “Small loose stool, no skin redness, tolerated left-side roll without pain” saves a colleague ten minutes of guesswork and protects the patient from repeated strain.
Prevent Your Own Injury While Assisting
Lift with your legs, never your back, and keep the patient close to your body during every turn. For heavier or fully dependent patients, ask for a second caregiver rather than muscling through alone, since a back injury ends your caregiving career faster than almost any other mistake. Bedside commodes and urinals are reasonable alternatives when the patient can transfer safely, and skipping the bedpan altogether is sometimes the safest choice for both of you.
Putting It Together
The whole bedpan nursing procedure step by step is a chain of small correct moves: warm pan, gloved hands, flat bed, proper rim direction, smooth slide, raised head, calm voice, immediate cleanup. When any link slips, the next one usually slips with it, which is why prepping the room before you touch the patient is the single highest-leverage habit in the whole routine.
FAQ
Where do you place a bedpan under a patient?
Slide the bedpan beneath the buttocks with the wide, curved rim pointing toward the sacrum so the rim seats against the buttocks without pressing into the tailbone. The narrow end points toward the feet.
What side do you place a bedpan on?
There is no fixed side. Approach from whichever side gives you the most control of the patient’s roll and the best reach, which is usually your dominant side or the side with the most bed space.
How do you position a patient on a bedpan?
Either have the patient bridge-lift with knees bent and feet flat while you slide the pan in, or log-roll them onto their side, seat the pan against the buttocks, and roll them back. The head of the bed should be raised 30 to 45 degrees once the pan is in place.
How do you safely remove a bedpan?
Lower the head of the bed, have the patient roll onto their side away from the pan, support the lower back with one hand, and slide the pan out smoothly with the other while keeping it level. Cover the pan immediately to contain odor.
What is the difference between a bedpan and a fracture pan?
A standard bedpan has a tall, rounded rim that needs the patient to lift their hips a few inches. A fracture pan has a low, flat rim that slides under a person who cannot lift at all, making it the right choice for hip precautions, spinal injuries, or severe weakness.
How often should a bedpan be offered to a bedridden patient?
Offer the bedpan at routine intervals, typically every two to three hours during the day and once or twice overnight, and respond promptly to any request. Scheduled toileting reduces incontinence episodes and protects skin from prolonged moisture exposure.
